HP XP7 Continuous Access Synchronous User Guide (TK911-96004)

DescriptionItem
• Pair Position: Whether the volume is a primary or secondary volume.
• Provisioning Type
1
: Volume's provisioning type.
• Emulation Type
1
: Volume's emulation type.
• Capacity
1
: Volume's capacity.
• CLPR
1
: Volume's CLPR.
• Virtual storage machine
1
: Virtual storage machine's model type and serial
number.
• Virtual LDEV ID
1
: Volume's virtual LDEV identifier.
• Virtual Device Name
1
: Volume's vrtual device name, in the format:
virtual emulation type/number of virtual LUSE volumes/virtual CVS attribute
- Only attributes that are specified display.
- "CVS" displays at the end of the device name, if the virtual CVS attribute is
specified.
- A blank indicates no values are specified.
• Virtual SSID
1
: Volume's virtual SSID. A blank indicates that no virtual SSID is
specified.
Copy Type
• Cnt Ac-S: Continuous Access Synchronous
• Cnt Ac-S Z: Continuous Access Synchronous Z
Pair status.Status
For status definitions, see “Pair status definitions” (page 60)
Information about volumes in the storage system connected to the accessed
system.
Remote Storage System
• Model / Serial Number: Remote system's model and serial number.
• SSID: Remote system's SSID number. Cnt Ac-S Z only.
• LDEV ID: LDEV identifier.
• Port ID: Port identifier when specifying an LDEV ID at pair creation. Note that
this field does not change if the remote system path settings are changed.
Cnt Ac-S only.
• Host Group Name: Host group name. Cnt Ac-S only.
• LUN ID: LUN identifier. Cnt Ac-S only.
• Virtual storage machine
1
: Virtual storage machine's model type and serial
number.
• Virtual LDEV ID
1
: Volume's virtual LDEV identifier.
Path group identifier.Path Group ID
Update type.Update Type
1
Pair's consistency group identifier.CTG ID
1
Whether the consistency group is shared by multiple storage systems.CTG Utilization
1
• Single: The consistency group consists of a single pair of primary and
secondary storage systems.
• Multi: The consistency group consists of multiple storage systems.
Cnt Ac-S Z only.Preserve Mirror Status
1
Preserve mirror status.
Specified P-VOL fence level.Fence Level
1
Specified time stamp transfer value.Host I/O Time Stamp Transfer
1
98 Cnt Ac-S GUI reference