HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide
Value to be specified for the subinfo parameter and acquir-
able information
Specifiable
subinfo parameter
Value of the para-
meter subtarget
The following information about pools can be acquired:
• LDEV: LDEV information
• LogicalUnit: Logical unit information
• PairedPool: Information about the pool on the other side
of the copy pair (if a copy pair is set for the pool)
• PoolTier: Hardware tier information
• ReplicationInfo: Copy pair information
poolsubinfoPool
The following information about ports can be acquired:
• HostStorageDomain: Host storage domain information
• WWN: WWN information
portsubinfoPort
This parameter is valid for the NAS configuration.
• IPAddress: IP address of the port controller
• PairedPortController: Information of the paired port
controller
controller-
subinfo
PortController
LogicalUnit: Information about logical units related to a copy
pair
replication-
subinfo
Replication-
Info
The following table shows examples of specifying the parameter subtarget and the subinfo
parameters.
Table 44 Examples of using the GetStorageArray command
Command specificationInformation to acquire
GetStorageArray subtarget=LDEV
LDEV information
GetStorageArray
subtarget=LogicalUnit
lusubinfo=Path
Information about paths for logical units
GetStorageArray subtarget=LDEV
ldevsubinfo=VolumeConnection
Mapping information of external volumes for LDEVs
GetStorageArray
subtarget=ArrayGroup
arraygroupsubinfo=LogicalUnit
lusubinfo=LDEV,Path
Information about logical units for parity groups and about
LDEVs and paths for those logical units
GetStorageArray subtarget=Path
pathsubinfo=WWN,HostInfo
Information about paths and WWNs for those paths
GetStorageArray subtarget=Pool
poolsubinfo=LogicalUnit
Information about pools and logical units for those pools
For details about parameters other than the parameter subtarget and the subinfo parameters, see
“GetStorageArray (subtarget not specified) ” on page 117 to “GetStorageArray
(subtarget=ReplicationInfo) ” on page 170.
Command reference116