HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

lastRefreshed=1,039,003,476
autoFormatLU=-1
statusOfDBInconsistency=0
configUpdateStatus=-1
openAllocatedActualCapacity=1,578,120,480
openUnallocatedCapacity=2,442,665,520
openUnallocatedActualCapacity=2,442,665,520
openReservedCapacity=4,806,720
openReservedActualCapacity=4,806,720
numberOfReservedLUs=2
numberOfOpenReservedLUs=2
numberOfImReservedLUs=0
distributedMode=-1
*****: The value is encoded by the CLI.
GetStorageArray (subtarget=FreeSpace)
GetStorageArray (subtarget=FreeSpace) obtains the information about the unused capacity
in parity groups.
Parameters
Table 51 GetStorageArray (subtarget=FreeSpace) command parameters
DescriptionStatusParameter name
Specify FreeSpace.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Object ID of a parity group that has unused capacity
Specify this parameter when you want to obtain information about
the unused capacity of a specific parity group. If you specify this
parameter, you must also specify the model and serialnum
parameters. If you specify the model and serialnum
parameters, and omit the arraygroupobjid parameter,
information about the unused capacity of all the parity groups in
the specified storage system is obtained. Specify the object ID
obtained from another CLI response. The value is encoded by the
CLI.
Optional
array-
groupobjid
CLI Reference Guide 131