HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

Parameters
Table 57 GetStorageArray (subtarget=Path) command parameters
DescriptionStatusParameter name
Specify Path.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Object ID of the path
Specify this parameter when you want to obtain information about
a specific path. If you specify this parameter, you must also specify
the model and serialnum parameters. If you specify the model
and serialnum parameters and omit the objectid parameter,
information about paths for the specified storage system is
obtained. Specify the object ID obtained from another CLI
response. The value is encoded by the CLI.
Optional
objectid
Specific information about the path
The values you can specify are HostInfo and WWN. If you specify
multiple values at the same time, separate the values by commas.
Optional
pathsubinfo
Starting sequence number of paths for which information is to be
obtained
Specify this parameter when you want to obtain information for
a part of paths for a specific storage system.
When path information is ordered as shown below and numbered
from 0 upward, specify the first number in the sequence of paths
that you want to obtain.
Order of paths:
1. Port IDs in ascending order
2. Domain IDs in ascending order
3. Device numbers in ascending order
This parameter must be specified together with the
numOfElementsFilter, model, and serialnum parameters.
Optional
startElement-
NumFilter
Number of paths for which information is to be obtained
Specify this parameter when you want to obtain information for
a part of paths for a specific storage system. Specify the number
of paths for which information is to be obtained. This parameter
must be specified together with the startElementNumFilter,
model, and serialnum parameters.
The maximum recommended value is 16384.
Optional
numOfElements-
Filter
CLI Reference Guide 153