HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

GetStorageArray (subtarget=PDEV)
GetStorageArray (subtarget=PDEV) obtains the information about PDEVs.
Parameters
Table 58 GetStorageArray (subtarget=PDEV) command parameters
DescriptionStatusParameter name
Specify PDEV.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Object ID of the parity group containing the PDEVs to be returned
Specify this parameter when you want to obtain information about
the PDEVs in a specific parity group. If you specify this parameter,
you must also specify the model and serialnum parameters.
If you specify the model and serialnum parameters and omit
the arraygroupobjid parameter, information about the PDEVs
in parity groups of the specified storage system is obtained.
When obtaining information about all the parity groups and
PDEVs, specify ALL. Specify the object ID obtained from another
CLI response. The value is encoded by the CLI.
Optional
array-
groupobjid
Specify this parameter when you want to obtain information about
a specific PDEV. If you specify this parameter, you must also
specify the model and serialnum parameters. If you specify
the model and serialnum parameters and omit the pdevid
parameter, information about PDEVs in the specified storage
system is obtained.
Optional
pdevid
Parameter values to obtain in advance
serialnum and model
Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
arraygroupobjid
Obtain this value from the execution result of the GetStorageArray (subtarget=ArrayGroup)
command. Execute this command by specifying only the model and serialnum parameters,
and ArrayGroup for the subtarget parameter. In the execution result of this command, the
objectID value appears under An instance of ArrayGroup. Use this objectID value
to specify the arraygroupobjid parameter.
pdevid
Obtain this value from the execution result of the GetStorageArray (subtarget=PDEV)
command. Execute this command by specifying only the model and serialnum parameters,
CLI Reference Guide 157