HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

When changing only the settings related to the THP pool:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number
poolid=pool-ID
[threshold=THP-pool-threshold-1]
[threshold2=DP-pool-threshold-2]
[threshold2mode={0|1}]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
[tiercontrol={enable|disable}] [automigration={enable|disable}]
[migrationinterval={ [monitoringmode={0|1}]1|2|4|8|24}]
[monitorstarttime=start-time-of-performance-monitoring]
[monitorendtime=end-time-of-performance-monitoring]
[monitoringmode={0|1}]
Format for XP24000/XP20000
When the command is used to expand a pool for Thin Provisioning Software:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number
poolid=pool-ID
adddevnums=device-number-of-logical-unit
[threshold=Thin-Provisioning-Software-pool-threshold]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
When changing the thresholds only:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number
poolid=pool-ID
[threshold=Thin-Provisioning-Software-pool-threshold]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
Parameters
Table 68 ModifyPool command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Pool ID
Specify the pool ID of the THP pool that you plan to expand or
whose settings you plan to change.
Required
poolid
CLI Reference Guide 183