HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

adddevnums
Obtain this value from the execution result of the GetStorageArray (subtarget=Logic-
alUnit, lusubinfo=LDEV) command. Execute this command by specifying only the model
and serialnum parameters, LogicalUnit for the subtarget parameter, and LDEV for the
lusubinfo parameter. In the execution result of this command, the devNum value of LogicalUnit
appears under An instance of LogicalUnit. Use the devNum value of a logical unit that
satisfies the conditions to be used as a pool volume in a THP pool, to specify the adddevnums
parameter.
Command execution example
In this example, the ModifyPool command expands the pool for Smart Tiers whose pool ID is 5
(poolid: 5) in the storage system (serialnum: 53039, model: VSPP9500).
hdvmcli ModifyPool -o "D:\logs\ModifyPool.log"
model=P9500 serialnum=53039 poolid=5 adddevnums=00:07:CF
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Pool elements:
An instance of Pool
objectID=*****
poolFunction=5
poolID=5
controllerID=-1
poolType=32
status=0
threshold=75
threshold2=80
threshold2Mode=0
capacityInKB=16,601,088
freeCapacityInKB=16,601,088
usageRate=0
numberOfPoolVols=2
numberOfVVols=0
capacityOfVVolsInKB=0
clprNumber=0
raidLevel=RAID5
combination=3D+1P
volAlertNotice=-1
overProvisioningPercent=-1
overProvisioningWarning=-1
overProvisioningLimit=-1
rpm=15,000
Command reference188