HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionStatusParameter name
Port name
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error will occur.
Optional
portname
New topology value for the port
Possible values are as follows.
For P9500, XP24000/XP20000, XP12000/XP10000/SVS200,
and XP1024/XP128:
• Fabric(on), FC-AL
• Fabric(off), FC-AL
• Fabric(on), Point-to-Point
• Fabric(off), Point-to-Point
Optional
topology
#
New fibre channel address for the port (the hex string represent-
ation)
Optional
fibreaddr
New transmission speed for a Fibre Channel connection to a port
You can specify the following values:
For P9500 and XP24000/XP20000:
• 0: Automatic
• 1: 1 Gbps
• 2: 2 Gbps
• 4: 4 Gbps
• 8: 8 Gbps
For XP12000/XP10000/SVS200:
• 0: Automatic
• 1: 1 Gbps
• 2: 2 Gbps
• 4: 4 Gbps
For XP1024/ XP128:
• 0: Automatic
• 1: 1 Gbps
• 2: 2 Gbps
Optional
channelspeed
#
New setting for LUN security enabled (either true or false)
Optional
lunsec
DomainID of the host storage domain
If you specify the nickname, newdomainnickname, hostmode,
hostmode2, hostmodeoption, wwn, wwnnickname or
newwwnnickname host storage domain attribute, you must also
specify either the domain or nickname parameter. Note that
when this parameter is specified, at least one host storage domain
attribute must also be specified. This parameter can be specified
in decimal and hexadecimal. If you specify a hexadecimal
number, add the 0x prefix.
The execution results are output in decimal.
Optional
domain
Command reference192