HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

• If you are assigning a volume for Thin Provisioning Software to a pool for Thin Provisioning Soft-
ware, the volume for Thin Provisioning Software must not already be assigned to a pool for Thin
Provisioning Software.
• If you are assigning a volume for Thin Provisioning Software to a pool for Thin Provisioning Soft-
ware, the status of the pool for Thin Provisioning Software must not be Blocked.
• If you are assigning a pool for Thin Provisioning Software, the over-provisioning percent must be
less than the over provisioning limit threshold.
• If you are releasing a volume for Thin Provisioning Software from a pool for Thin Provisioning
Software, or if you are only changing the threshold value, the volume for Thin Provisioning Software
must already be assigned to a pool for Thin Provisioning Software.
• If you are releasing a volume for Thin Provisioning Software from a pool for Thin Provisioning
Software, it must not have a path.
NOTE:
If you execute this command when the threshold values related to the over-provisioning percent (the
over provisioning warning threshold and over provisioning limit threshold) are set, make sure that
the Device Manager server database is consistent. These threshold values are specific thresholds
managed by the Device Manager server. If the over-provisioning percent information that has been
obtained by Device Manager does not match the actual over-provisioning percent, the system's
determination of whether the over provisioning warning threshold and over provisioning limit threshold
values have been exceeded might be incorrect.
For details about the number of THP volumes that can be assigned to a single THP pool, see the Thin
Provisioning documentation.
Format for P9500
hdvmcli [URL] ModifyVirtualVolume [options]
model=model serialnum=serial-number devnums=device-number-of-THP-volume
[capacity=capacity-of-the-THP-volume-after-expansion]
[tieringpolicy={0|1|2|3|4|5}]
NOTE:
Either the capacity or tieringpolicy parameter or both must be specified.
Format for XP24000/XP20000
When the command is used to assign volumes for Thin Provisioning Software to a pool for Thin
Provisioning Software:
hdvmcli [URL] ModifyVirtualVolume [options]
model=model serialnum=serial-number assign=true
devnums=device-number-of-volume-for-Thin-Provisioning-Software
poolid=pool-ID-of-pool-for-Thin-Provisioning-Software
[threshold=usage-rate-threshold-of-volumes-for-Thin-Provisioning-Software]
When the command is used to release the assignation between volumes for Thin Provisioning Software
and a pool for Thin Provisioning Software:
CLI Reference Guide 199