HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

hdvmcli [URL] ModifyVirtualVolume [options]
model=model serialnum=serial-number assign=false
devnums=device-number-of-volume-for-Thin-Provisioning-Software
When the command is used to change the usage rate threshold of volumes for Thin Provisioning
Software:
hdvmcli [URL] ModifyVirtualVolume [options]
model=model serialnum=serial-number
devnums=device-number-of-volume-for-Thin-Provisioning-Software
threshold=usage-rate-threshold-of-volumes-for-Thin-Provisioning-Software
Parameters
Table 71 ModifyVirtualVolume command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Specify true to assign volumes for Thin Provisioning Software
to a pool for Thin Provisioning Software.
Specify false to release volumes for Thin Provisioning Software
from a pool for Thin Provisioning Software.
Omit this parameter if you are changing the threshold value.
Optional
(XP24000/XP20000)
assign
Device number(s) of THP volume(s)
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
Use a comma to delimit multiple values.
Required
devnums
Pool ID of the pool for Thin Provisioning Software
You need specify this parameter only if true is specified for the
assign parameter.
Optional
(XP24000/XP20000)
poolid
Usage rate threshold for the volumes for Thin Provisioning
Software (%)
Specify this parameter when you are assigning volumes for Thin
Provisioning Software to a pool for Thin Provisioning Software,
or when you are changing the threshold value.
Specify a multiple of 5 from 5 to 300.
If this parameter is omitted when true is specified for the assign
parameter, 5 is set.
This parameter must be specified if the assign parameter is
omitted.
Do not specify this parameter when false is specified for the
assign parameter. If the parameter is specified in this condition,
an error will occur.
Optional
(XP24000/XP20000)
threshold
Command reference200