HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

osscsibus=0 osscsiid=15 oslun=1 portwwn=11.22.33.44.55.66.77.88
filetype=NTFS filename=C: size=10 percentused=10
Command execution result
RESPONSE:
An instance of HostInfo
objectID=*****
name=MY_HOSTINFO_XP1024
serialNumber=10001
arrayType=XP1024
ipAddress=172.16.64.159
mountPoint=C:
portID=7
portName=CL1-H
domainID=0
scsiID=15
lun=2
devNum=2
displayDevNum=00:02
osScsiBus=0
osScsiID=15
osLun=1
portWWN=11.22.33.44.55.66.77.88
fileSystemType=NTFS
fileSystemName=C:
sizeInMB=10
percentUsed=10
lastUpdated=1039003476
*****: The value is encoded by the CLI.
AddHostRefresh
AddHostRefresh refreshes the information about the hosts that Device Manager manages, which
is obtained from the Device Manager agent.
NOTE:
• This command does not support virtualization servers. To refresh the information of a virtualization
server, use the RefreshVirtualizationServer command.
• If the copy pair management host is unable to recognize a copy pair that was created on a host
that is not the copy pair management host, the copy status of that copy pair cannot be refreshed
even if the AddHostRefresh command is executed. In such a case, use the AddStorageArray
command to refresh the storage system containing the copy pair whose status you want to update.
Format
When refreshing the information for a host:
Command reference232