HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

Obtain these values from the execution result of the GetHost command without specifying any
parameters. Specify the value of objectID that is displayed as An instance of Host in
the objectid parameter, the value of name that is displayed as An instance of Host in
the hostname parameter, the value of objectID that is displayed as An instance of
ConfigFile in the configfileid parameter, and the value of replicationGroupID that
is displayed as An instance of ReplicationGroup in the replicationgroupid
parameter.
Command execution example 1
This example obtains the pair information defined in the RAID Manager configuration definition file
whose configFileID is CONFIGFILE.1.11 in the host whose objectID is HOST.1.
hdvmcli GetHost -o "D:\logs\GetHost.log" "objectid=*****"
configFileID=CONFIGFILE.1.11
*****: The value is encoded by the CLI.
Command execution result 1
RESPONSE:
An instance of Host
objectID=*****
name=toro2
hostID=1
ipAddress=192.168.32.63
capacityInKB=0
hostType=-1
statusOfDBUpdating=0
List of 2 WWN elements:
An instance of WWN
WWN=00.99.66.33.88.55.22.77
nickname=Jane
An instance of WWN
WWN=11.44.77.22.55.88.33.66
nickname=Jone
List of 1 ConfigFile elements:
An instance of ConfigFile
objectID=*****
instanceNumber=11
controlledBy=Device Manager
portNumber=50000
valid=1
List of 1 ReplicationGroup elements:
An instance of ReplicationGroup
objectID=*****
replicationGroupID=3
groupName=HCMD_CG0003
pvolHostID=1
pvolInstanceNumber=11
pvolPortNumber=50,000
pvolHORCMMONHostName=192.168.32.63
pvolHORCMINSTHostName=192.168.32.63
svolHostID=2
svolInstanceNumber=12
CLI Reference Guide 241