HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

fileSystemName=E:
sizeInMB=156
percentUsed=50
lastUpdated=1039003476
*****: The value is encoded by the CLI.
ModifyVirtualizationServer
ModifyVirtualizationServer modifies information about virtualization servers.
Format
When modifying information about a virtualization server:
hdvmcli [URL] ModifyVirtualizationServer [options]
hostname=host-name-of-virtualization-server [ipaddress=IP-address]
[hostprotocol={Secure|Non-secure}] [hostuserid=user-ID]
[hostuserpassword=user-password]
Parameters
Table 94 ModifyVirtualizationServer command parameters
DescriptionStatusParameter name
Host name of the virtualization server whose information is to be
modified
Required
hostname
IP address
Specify this parameter if you want to modify the IP address of the
virtualization server or the virtualization-server management
program.
To specify the IP address of the virtualization server, use an IPv4
address. To specify the IP address of the virtualization-server
management program, use either an IPv4 or IPv6 address.
Optional
#
ipaddress
Protocol of the virtualization server or virtualization server
management program
Specify this parameter if you want to modify the protocol.
You can specify either of the following values:
• Non-secure: HTTP communication
• Secure: HTTPS communication
Optional
#
hostprotocol
User ID
Specify this parameter if you want to modify the user ID used to
access the virtualization server or the virtualization-server
management program.
Optional
#
hostuserid
User password
Specify this parameter if you want to modify the password for
the user ID specified in hostuserid.
Optional
#
hostuserpass-
word
#
CLI Reference Guide 257