HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

hdvmcli [URL] DeleteURLLink [options]
{objectid=object-ID-of-the-URLLink
|linkedid=object-ID-of-SMI-S-Enabled-storage-system}
targetoption=smi-s
When deleting a URLLink for a Device Manager object other than an SMI-S Enabled storage system:
hdvmcli [URL] DeleteURLLink [options]
{objectid=object-ID-of-the-URLLink
|linkedid=object-ID-of-the-Device-Manager-object}
[targetoption=other]
Parameters
Table 98 DeleteURLLink command parameters
DescriptionStatusParameter name
The object ID of the URLLink to delete
#2
Specify the object ID obtained from another CLI response. The
value is encoded by the CLI.
Optional
#1
objectid
The object ID of the Device Manager object from which the
URLLink is deleted
#2
All the URLLinks set for the specified Device Manager object will
be deleted. Specify the object ID obtained from another CLI
response. The value is encoded by the CLI.
Optional
#1
linkedid
Type of the Device Manager object from which the URLLink is
deleted
One of the following values can be specified. The values are not
case-sensitive.
• smi-s: SMI-S Enabled storage system
• other: Device Manager object other than an SMI-S Enabled
storage system
If this parameter is omitted, other is set.
Optional
targetoption
#1
Specify either objectid or linkedid. Do not specify both parameters at the same time. If they
are specified at the same time, an error will occur.
#2
The DeleteURLLink command only deletes URLLinks set by a user. The command cannot delete
URLLinks that are automatically set by the Device Manager server when an SMI-S Enabled storage
system is initially registered.
Command execution example
hdvmcli DeleteURLLink -o "D:\logs\DeleteURLLink.log"
"objectid=*****"
"targetoption=smi-s"
CLI Reference Guide 263