HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide
IPAddress instance
The IPAddress instance is output when the GetStorageArray (subtarget=PortController)
command (see “GetStorageArray (subtarget=PortController) ” on page 168) is executed.
Table 122 IPAddress instance attribute
DescriptionAttribute
IP address of the port controller
This item is output when NAS is created.
ipAddress
LDEV instance
The LDEV instance is output when the following commands are executed:
• “AddLogicalUnit” on page 56
• “AddLun” on page 215
• “AddLUSE” on page 63
• “AddVirtualVolume” on page 82
• “FormatLU” on page 102
• “GetStorageArray (subtarget=ArrayGroup) ” on page 119
• “GetStorageArray (subtarget=LDEV) ” on page 138
• “GetStorageArray (subtarget=LogicalUnit) ” on page 144
• “GetStorageArray (subtarget=MFReplicationInfo) ” on page 149
• “GetStorageArray (subtarget=Pool) ” on page 159
• “ModifyVirtualVolume” on page 198
Table 123 LDEV instance attributes
DescriptionAttribute
Object ID of the LDEV
objectID
LDEV name
This item is output if it has been registered.
name
Device number of the LDEV
For P9500 or XP24000/XP20000, a combination of a logical DKC number, a
CU number, and an LDEV number
(=logical-DKC-number*65536+CU*256+LDEV) is output.
For XP12000/XP10000/SVS200 or XP1024/XP128, a combination of a CU
number and an LDEV number (=CU*256+LDEV) is output.
devNum
Display name of the LDEV
displayName
Emulation mode
This item is output for P9500, XP24000/XP20000, XP12000/XP10000/SVS200,
or XP1024/XP128 (example: OPEN-8).
emulation
CLI Reference Guide 313