HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionAttribute
Usage rate threshold of the virtual volume
One of the following values is output for P9500 or XP24000/XP20000:
• When the logical unit consists of THP volumes: usage rate threshold value of
the THP volumes
#1, #2
• For volumes other than THP volumes : -1 is output.
#1
When the THP volumes are not assigned to a THP pool, -1 is displayed.
#2
When the operator is a partitioned storage administrator, -1 is displayed.
-1 is output for other storage systems.
threshold
Indicates whether the LDEV is being used as a system drive.
One of the following values is output for P9500 or XP24000/XP20000:
• -1: Unknown
• 0: Not being used as a system drive
• 1: Being used as a system drive
0 is output for other storage systems.
systemDisk
Name of the parity group to which the LDEV belongs
GroupName
Indicates whether the data that is stored in the LDEV is encrypted.
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• 0: The data is not encrypted.
• 1: The data is encrypted.
-1 is output for other storage systems.
encrypted
Capacity (KB) that has been assigned to THP volumes from the hardware tier
whose ID (tierID) is 0
thpTier0ConsumedCpa-
cityInKB
Capacity (KB) that has been assigned to THP volumes from the hardware tier
whose ID (tierID) is 1
thpTier1ConsumedCpa-
cityInKB
Capacity (KB) that has been assigned to THP volumes from the hardware tier
whose ID (tierID) is 2
thpTier2ConsumedCpa-
cityInKB
Tiering policy for volumes for Smart Tiers (virtual volumes)
This attribute is valid only when volumes for Smart Tiers are used in P9500.
For details about the output values, see the tieringpolicy parameter in Table
71.
tieringPolicy
Output items318