HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionAttribute
Emulation mode
This item is output for P9500, XP24000/XP20000, XP12000/XP10000/SVS200,
or XP1024/XP128 (example: OPEN-8).
emulation
Count of LDEV contained in the logical unit
For regular volumes, devCount is 1.
devCount
Type of the LDEV contained in the logical unit
This item indicates the purpose of the LDEV.
CommandDevice: The LDEV is a command device.
devType
Volume size of the logical unit (in KB)
capacityInKB
Indicates whether a path is assigned to the logical unit:
• true: A path is assigned.
• false: No path is assigned.
path
Indicates whether the logical unit is used a command device:
• true: Used as a command device.
• false: Not used as a command device.
commandDevice
Indicates whether command device security is set when the logical unit is used as
a command device:
• true: Set.
• false: Not set.
commandDeviceSecur-
ity
Indicates the usage status of the logical unit.
• 0: Not a command device.
• 1: Command device.
• 2: Remote command device.
commandDeviceEx
Number of the chassis where the logical unit is located
chassis
Number of the parity group containing the logical unit
arrayGroup
RAID level of the logical unit
RAID levels are output in the format RAIDx(yD+zP).
• RAIDx: RAID level
• yD: Number of data drives
• zP: Number of parity drives
For example, RAID5(3D+1P) indicates a RAID5 configuration consisting of three
data drives and one parity drive.
raidType
Currently, this information does not apply to storage systems (-1 is output).
currentPortControl-
ler
Currently, this information does not apply to storage systems (-1 is output).
defaultPortControl-
ler
CLI Reference Guide 321