HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionAttribute
Pool ID of Snapshot
• When the logical unit is the P-VOL or S-VOL of Snapshot: Pool ID of the pool
used by the logical unit
• When the logical unit is a pool volume: Pool ID of the pool to which the logical
unit has been assigned
In other cases, -1 is output.
snapshotPoolID
Pool ID of logical unit
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• When the logical unit is the P-VOL, S-VOL,or SP-VOL of Continuous Access
Journal Software: Pool ID of the pool used by the logical unit
• When the logical unit is a pool volume: Pool ID of the pool to which the logical
unit has been assigned
In other cases, -1 is output.
journalPoolID
Type of the Thin Provisioning volume
One of the following values is output for P9500 or XP24000/XP20000:
• -1: Non-THP volume
• 0: THP volume
• 1: THP pool volume
-1 is output for other storage systems.
thpType
Usage of on the THP volume (KB)
One of the following values is output for P9500 or XP24000/XP20000:
• When the logical unit does not consist of THP volumes: The same value as
capacityInKB.
• When the logical unit consists of THP volumes: Usage of on the THP volumes.
-1 is output for other storage systems.
For P9500 or XP24000/XP20000, note the following points on the value that is
output for THP volume usage:
• When the THP volumes are not assigned to a THP pool, 0 is displayed.
• When the operator is a partitioned storage manager, -1 is output.
• Volume capacity is allocated from the logical unit in units of tens of megabytes,
so, when the usage rate of the logical unit reaches 100%, the value of con-
sumedCapacityInKB might not match the value of capacityInKB.
• This value might increase significantly depending on the combination of the
file system and the OS of the host that is using the THP volumes. For details,
see the Thin Provisioning documentation.
consumedCapa-
cityInKB
CLI Reference Guide 323