HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide
DescriptionAttribute
Over provisioning warning threshold (%)
If the storage system is P9500 or XP24000/XP20000 and poolFunction is 5,
the threshold used to issue an advance warning for the over-provisioning percent
is output.
This information is invalid for other cases (-1 is output).
overProvisioning-
Warning
Over provisioning limit threshold (%)
If the storage system is P9500 or XP24000/XP20000 and poolFunction is 5,
the threshold used to report an excess limit for the over-provisioning percent is
output.
This information is invalid for other cases (-1 is output).
overProvisioningLim-
it
Drive revolutions per minute
If the storage system is P9500 and a pool for Thin Provisioning Software is used,
the rotational speed (RPM) is output. For an unknown drive or a drive of a different
rotational speed, -1 is output.
This information is invalid for other cases (-1 is output).
rpm
Type of the drive
If the storage system is P9500 and a pool for Thin Provisioning Software is used,
one of the following values is output:
• -1: Unknown or a different drive type
• 1: SATA
• 4: SAS
• 5: SSD
This information is invalid for other cases (-1 is output).
diskType
Indicates whether the pool is a pool for Smart Tiers.
• enable: pool for Smart Tiers
• disable: pool for Thin Provisioning Software
tierControl
Indicates whether the automatic execution of performance monitoring and hardware
tier relocation is enabled.
This attribute is valid only when a pool for Smart Tiers is used.
• enable
• disable
autoMigration
Execution cycle of performance monitoring and hardware tier relocation
• 0: 30 minutes
• 1: 1 hour
• 2: 2 hours
• 4: 4 hours
• 8: 8 hours
• 24: 24 hours
migrationInterval
#1
Start time of performance monitoring (example: 00:00)
This attribute is valid only when migrationInterval is 24.
monitorStartTime
#1
Output items334