HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionAttribute
End time of performance monitoring (example: 23:59)
This attribute is enabled only when migrationInterval is 24.
monitorEndTime
#1
Performance monitoring mode
• 0: Periodic
• 1: Continuous
monitoringMode
#1
Indicates whether a THP pool can be configured by mixing internal and external
volumes.
• enable
• disable
externalMixCompat-
ible
Execution status of performance monitoring
• 0: Stopped
• 1: Executing
monitoringState
#2
Date and time at which performance monitoring started
If the date and time is valid, it is output in YYYY/MM/DD hh:mm:ss format. If it is
invalid, -1 is output.
lastMonitor-
StartDate
#2
Date and time at which performance monitoring ended
If the date and time is valid, it is output in YYYY/MM/DD hh:mm:ss format. If it is
invalid, -1 is output.
lastMonitorEnd-
Date
#2
Execution status of hardware tier relocation
• 0: Stopped
• 1: Executing
relocationState
#2
Progress percentage of hardware tier relocation
relocationPro-
gress
#2
Number of hardware tiers
This attribute is valid only when a pool for Smart Tiers is used.
numberOfTiers
#1
This attribute is valid only when a pool for Smart Tiers is used, and tierControl is enable.
#2
This attribute is valid only when a pool for Smart Tiers is used, and tierControl is disable.
This information is invalid for other cases (-1 is output).
PoolTier instance
The PoolTier instance is output when the following commands are executed:
• “AddPool” on page 66
• “GetStorageArray (subtarget=Pool) ” on page 159
CLI Reference Guide 335