HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionAttribute
Port name
This item is output if it has been registered.
name
Port ID
portID
Port type (example: Fibre)portType
Address of the Fibre port (AL_PA)
For P9500, XP24000/XP20000, XP12000/XP10000/SVS200, or
XP1024/XP128, either of the following values is output:
• 00 or no value: Neither a Fibre port nor an FCoE port
• 01 - EF: Valid address (two-digit hexadecimal number)
fibreAddress
Fibre topology
topology
Display name of the port
displayName
Indicates whether LUN security is valid for the port.
• true: Valid
• false: Not valid
lunSecurityEnabled
Port controller ID
controllerID
Port option
No value is output if the option is invalid.
portOption
WWN of the port
This item is valid when the port is a Fibre port or an FCoE port.
worldWidePortName
Channel speed
• -1: None
• 0: Automatic
• 1: 1 Gbps
• 2: 2 Gbps
• 4: 4 Gbps
• 8: 8 Gbps
channelSpeed
Port attribute
• Target
• RCU Target
• Initiator
• LCP
• RCP
• External: External port
• No value: Unknown
portRole
SLPR number
-1 is output for storage systems that do not support SLPR.
slprNumber
CLI Reference Guide 337