HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide
DescriptionAttribute
Value specified in HORCM_INST for the S-VOL in the HORCM configuration file
In the HORCM configuration file, if HORCM_INST is set to localhost, the
loopback address is output.
svolHORCMINSTHost-
Name
Copy type
• BusinessCopy: Business Copy Software
• ContinuousAccessSync: Continuous Access Synchronous Software
• ContinuousAccessAsync: Continuous Access Asynchronous Software
• Snapshot: Snapshot
• ContinuousAccessJournal: Continuous Access Journal Software
replicationFunction
Fence level of the P-VOL (example: Data)fenceLevel
Copy pace
-1 is output for unknown or Continuous Access Journal Software.
copyTrackSize
ReplicationInfo instance
The ReplicationInfo instance is output when the following commands are executed:
• “AddReplication” on page 277
• “DeleteReplication” on page 289
• “GetHost” on page 238
• “GetStorageArray (subtarget=Pool) ” on page 159
• “GetStorageArray (subtarget=ReplicationInfo) ” on page 170
• “ModifyReplication” on page 294
Table 140 ReplicationInfo instance attributes
DescriptionAttribute
Object ID of ReplicationInfoobjectID
Name of the copy pair used by the RAID Manager
This item is output if it has been registered.
pairName
Serial number of the storage system containing the P-VOL
pvolSerialNumber
Type of the storage system containing the P-VOL
If the storage system containing the P-VOL is not registered, Unknown is output.
pvolArrayType
Device number of the P-VOL
pvolDevNum
P-VOL object ID
pvolObjectID
CLI Reference Guide 343