HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide
• “GetStorageArray (subtarget=Path) ” on page 152
• “GetStorageArray (subtarget=PDEV) ” on page 157
• “GetStorageArray (subtarget=Pool) ” on page 159
• “GetStorageArray (subtarget=Port) ” on page 165
• “GetStorageArray (subtarget=PortController) ” on page 168
• “GetStorageArray (subtarget=ReplicationInfo) ” on page 170
• “GetTieredPoolStatus” on page 174
• “GetZeroPageReclaimStatus” on page 175
• “ModifyLogicalUnit” on page 180
• “ModifyPool” on page 182
• “ModifyPort” on page 190
• “ModifyPortController” on page 197
• “ModifyVirtualVolume” on page 198
• “RefreshStorageArrays” on page 205
• “RunZeroPageReclaim” on page 207
• “ShrinkPool” on page 209
NOTE:
For SMI-S Enabled storage systems, valid information is output to the following attributes: objectID,
name, serialNumber, arrayFamily, arrayType, capacityInGB, capacityInKB, and
statusOfDBInconsistency.
Table 142 StorageArray instance attributes
DescriptionAttribute
Object ID of the storage system
objectID
Name of the storage system
This item is output if it has been registered.
name
Description of the storage system
description
Serial number of the storage system
serialNumber
Family of the storage system
arrayFamily
Type of the storage system
arrayType
SVP microcode version
This item is output for P9500, XP24000/XP20000, XP12000/XP10000/SVS200,
or XP1024/XP128.
microcodeVersion
SNMP agent version
This item is output for P9500, XP24000/XP20000, XP12000/XP10000/SVS200,
or XP1024/XP128.
agentVersion
Product name
productName
The microcode version of the DKC
controllerVersion
CLI Reference Guide 347