HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

portID=0
portName=CL1-A
domainID=0
scsiID=15
LUN=100
wwnSecurityValidity=true
An instance of Path
objectID=*****
devNum=817
displayDevNum=03:31
portID=0
portName=CL1-A
domainID=0
scsiID=15
LUN=101
wwnSecurityValidity=true
An instance of Path
objectID=*****
devNum=816
displayDevNum=03:30
portID=4
portName=CL1-B
domainID=0
scsiID=15
LUN=102
wwnSecurityValidity=true
An instance of Path
objectID=*****
devNum=817
displayDevNum=03:31
portID=4
portName=CL1-B
domainID=0
scsiID=15
LUN=103
wwnSecurityValidity=true
*****: The values are encoded by the CLI.
When an error occurs during batch functionality execution
This section explains how to take action if an error occurs during batch functionality execution.
When the target storage system is other than XP24000/XP20000, or is an
XP24000/XP20000 whose microcode version is earlier than 60-02-00-00/00
If an error occurs during the batch functionality execution, perform the following procedure to check
up to what point the batch file content was processed. For the unprocessed commands, re-create the
batch file, and re-execute the batch functionality.
1. Execute the AddStorageArray command or RefreshStorageArrays command.
The path information from the host to the volume is updated.
Batch functionality370