HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

ManualsBrandsHP ManualsComputer AccessoriesHP XP P9500 Storage DKC Module-1 Controller Upgrade Base Rack

For details, see the documentation of the LUN management product for the storage system you are

using.

Table 23 Values that can be specified in the hostmodeoption parameter

Description

hostmodeoption

values

Specify this value when using VERITAS Database Edition/Advanced Cluster for Real

Application Clusters or VERITAS Cluster Server 4.0 or later (I/O fencing feature).

2

Specify this value when all of the following conditions are satisfied:

• The host mode is set to Windows (mode 0C) or Windows Extension (mode 2C).

• An Emulex host bus adapter is in use.

• A mini-port driver is in use.

• The TPRLO parameter for the mini-port driver of the host bus adapter is set to 2.

6

Specify this value when both of the following conditions are satisfied:

• The host mode is set to Standard (mode 00) or Solaris (mode 09).

• You want to let the system automatically recognize the reduction and increase in the

number of devices when a SUN host bus adapter is in use.

7

Specify this value when both of the following conditions are satisfied:

• The host mode is set to HP (mode 03).

• You want to prevent devices to which no paths have been defined from creating a

device file when the HP-UX host is connected.

12

Specify this value when you want to get a SIM notification when the number of unsuc-

cessful connections between ports exceeds a threshold.

13

Specify this value when both of the following conditions are satisfied:

• The host mode is set to Tru64 (mode 07).

• You want to use TruCluster to set up a cluster on both the primary and secondary

volumes for Continuous Access Software.

14

Specify this value when both of the following conditions are satisfied:

• The host mode is set to AIX (mode 0F).

• HACMP 4.5 4.5.13 or later, HACMP 5.1 5.1.0.4 or later, or HACMP 5.2 or later

is in use.

15

Specify this value when you are using XP12000/XP10000/SVS200 to register a host

on which VMware is running in a host group.

19

Specify this value when both of the following conditions are satisfied:

• The host mode is set to AIX (mode 0F).

• VERITAS Cluster Server is in use.

22

Specify this value when you want to run the REC (READ Exchange Concise) command.

23

Command reference52