HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

When creating multiple logical units in bulk by specifying their number:

hdvmcli [URL] AddLogicalUnit [options]

serialnum=serial-number model=model

{chassis=chassis-number

groupnum=parity-group-number|arraygroupname=parity-group-name}

[fsindex=index-number-of-region-of-unused-capacity] creationoption=dividebynum

numoflus=number-of-logical-units-to-be-created [emulation=OPEN-V]

[devnum=logical-unit-device-number] [lusubinfo=LDEV]

[format={none|normal|quick

}] [capacitytype={KB|block}]

For the XP24000/XP20000, you can specify quick for the format parameter.

Format for XP1024/XP128

hdvmcli [URL] AddLogicalUnit [options]

serialnum=serial-number model=model

{chassis=chassis-number

groupnum=parity-group-number|arraygroupname=parity-group-name}

capacity=capacity-of-the-logical-unit [emulation=emulation-type]

[devnum=logical-unit-device-number] [lusubinfo=LDEV]

Parameters

Table 25 AddLogicalUnit command parameters

DescriptionStatusParameter name

Serial number of the storage system where the LU is addedRequired

serialnum

Model of the storage system where the LU is addedRequired

model

Number of the chassis for the parity group where the LU is added

If you specify this parameter, make sure that groupnum is also

specified.

Always specify either the chassis and groupnum parameters

together, or the arraygroupname parameter by itself. Do not

specify arraygroupname together with chassis and

groupnum. Doing so will result in an error.

Optional

chassis

Number of the parity group where the LU is added