HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionStatusParameter name
Pool ID
Specify the pool ID of the THP pool to be created.
You can specify an integer from 0 to 127.
If this parameter is omitted, it is set automatically.
Do not specify a pool ID that is already being used by Thin
Provisioning Software.
Optional
poolid
Threshold1 of the THP pool (%)
The threshold1 of the THP pool is the usage rate of the THP
pool.
For P9500 whose microcode version is earlier than 70-01-
4X-XX/XX:
Specify a multiple of 5 in the range from 5 to 95.
For P9500 whose microcode version is 70-01-4X-XX/XX or
later:
Specify an integer in the range from 1 to 100.
For XP24000/XP20000:
Specify a multiple of 5 from 5 to 95.
If this parameter is omitted, 70 is set.
Optional
threshold
Threshold2 of the THP pool (%)
The threshold2 of the THP pool is the usage rate of the THP
pool.
For P9500 whose microcode version is earlier than 70-01-
4X-XX/XX:
A value cannot be specified for threshold2.
For P9500 whose microcode version is 70-01-4X-XX/XX or
later:
If you specify this parameter, threshold2mode must
be set to 1.
Specify an integer in the range from 1 to 100.
You need to specify a value larger than the one spe-
cified for threshold.
If this parameter is omitted, 80 is set.
Optional
(P9500)
threshold2
Specify whether to use the value specified for threshold2
for the THP pool.
One of the following values can be specified:
• 0: Uses the value determined by the storage system.
• 1: Uses the value specified for threshold2.
You can specify 1 only when the microcode version is
70-01-4X-XX/XX or later.
If this parameter is omitted, 1 is set when the microcode
version is 70-01-4X-XX/XX or later, and 0 is set when the
microcode version is earlier than 70-01-4X-XX/XX.
Optional
(P9500)
threshold2mode
CLI Reference Guide 69