HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionStatusParameter name
Over provisioning warning threshold (%)
This is a threshold value related to the over-provisioning
percent.
#2
Specify a threshold value used to issue an advance warning.
For P9500:
Specify an integer from 0 to 65534. You need to spe-
cify a value smaller than the one specified for overpro-
visioninglimit.
If this parameter is omitted, -1 is set.
-1 indicates that a threshold value is not set.
For XP24000/XP20000:
Specify an integer from 10 to 1000. You need to spe-
cify a value smaller than the one specified for overpro-
visioninglimit.
If this parameter is omitted, -1 is set.
-1 indicates that a threshold value is not set.
Optional
overprovisioning-
warning
#1
Over provisioning limit threshold (%)
This is a threshold value related to the over-provisioning
percent.
#2
Specify a threshold value used to issue an excess limit
warning.
For P9500:
Specify an integer from 0 to 65534. You need to spe-
cify a value larger than the one specified for overpro-
visioningwarning.
If this parameter is omitted, -1 is set.
-1 indicates that a threshold value is not set.
If you specify a threshold value and the over-provision-
ing percent
#2
exceeds the specified threshold value,
you cannot create a THP volume.
For XP24000/XP20000:
Specify an integer from 10 to 1000. You need to spe-
cify a value larger than the one specified for overpro-
visioningwarning.
If this parameter is omitted, -1 is set.
-1 indicates that a threshold value is not set.
If you specify a threshold value and the over-provision-
ing percent
#2
exceeds the specified threshold value,
you cannot create a volume for Thin Provisioning Soft-
ware or assign volumes for Thin Provisioning Software
to a pool for Thin Provisioning Software.
Optional
overprovi-
sioninglimit
#1
Command reference70