HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

ManualsBrandsHP ManualsComputer AccessoriesHP XP P9500 Storage DKC Module-1 Controller Upgrade Base Rack

An instance of Pool

objectID=*****

poolFunction=5

poolID=1

controllerID=-1

poolType=32

status=20

threshold=70

threshold2=80

threshold2Mode=0

capacityInKB=319,678,464

freeCapacityInKB=319,678,464

usageRate=0

numberOfPoolVols=31

numberOfVVols=1

capacityOfVVolsInKB=419,457,024

clprNumber=0

raidLevel=RAID5

combination=3D+1P

volAlertNotice=-1

overProvisioningPercent=131

overProvisioningWarning=-1

overProvisioningLimit=500

rpm=10,000

diskType=4

tierControl=disable

autoMigration=disable

migrationInterval=24

monitorStartTime=00:00

monitorEndTime=23:59

monitoringMode=0

externalMixCompatible=disable

monitoringState=1

lastMonitorStartDate=2011/07/14 07:48:00

lastMonitorEndDate=-1

relocationState=0

relocationProgress=-1

numberOfTiers=1

*****: The value is encoded by the CLI.

AddVirtualVolume

AddVirtualVolume creates THP volumes (virtual volumes) in a target storage system. This command

also assigns the THP volumes to be added to a target THP pool.

NOTE:

This command can be used only with P9500 and XP24000/XP20000.

If you use the poolid parameter to specify the pool ID of a THP pool, the THP volumes that are

created are assigned to that THP pool.

For P9500 or XP24000/XP20000, AddVirtualVolume can be used to create a virtual parity group

and populate it with THP volumes. For XP24000/XP20000, AddVirtualVolume can be used to

create volumes for Thin Provisioning Software in an existing virtual parity group.

Command reference82