HP XP7 Auto LUN User Guide (TK915-96001)

Table 2 Candidates for source and target volumes by program product (continued)
Target Volume Candidate?Source Volume Candidate?Volume Type/StatusProgram Product
NoYes, if volumes are in SMPL
status
Deleted pair volumes from a
storage system in a primary
site
NoYes, if volume is in SMPL
status
Deleted secondary volume
from a storage system in a
primary site
NoYes, if volume is in SMPL
status
Deleted primary volume from
a storage system in a
secondary site
NoYesA volume in suspended,
simplex, or duplex status
Continuous Access
Synchronous Z
NoYes, if volume is in
suspended status
An external primary volume
NoYes, if volume is in simplex
status
An external secondary
volume
NoYes. Note that the target
volume must be in the same
CLPR.
A data volume pairContinuous Access Journal
and Continuous Access
Journal Z
NoNoA journal volume
NoYes. Note that the target
volume must be in the same
CLPR.
A primary volume in any
status
Continuous Access Journal
NoYes. Note that the target
volume must be in the same
CLPR.
A secondary volume in PSUS
status
NoNoA volume in COPY or PAIR
status
NoYes. Note that the target
volume must be in the same
CLPR.
A primary volume in any
status
Continuous Access Journal
Z
NoYes. Note that the target
volume must be in the same
CLPR.
A secondary volume in
suspend status
NoNoA volume in Pending Duplex
or Duplex status
NoNoA normal volumeCompatible XRC
NoYesSource volumeCompatible FlashCopy and
Compatible FlashCopy SE
NoNoTarget volume
NoYesBC pair volumesBusiness Copy and
Business Copy Z
NoYesA primary volume in a BC
pair where the primary
volume to secondary volume
ratio is 1:1 or 1:2
NoNoA primary volume in a BC
pair where the primary
volume to secondary volume
ratio is 1:3
10 Requirements