HP XP7 Provisioning for Open Systems User Guide (H6F56-96009)

7. Click Apply.
If the Go to tasks window for status check box is selected, the Tasks window appears.
8. Click Finish.
9. In the Confirm window, verify your settings. In Task Name, type a unique name for this task
or accept the default, and then click Apply.
ExplanationItem
Satisfy either one of following:Tier1 Max
Equal to Tier1 Min
Bigger than Tier1 Min
Satisfy either one of following:Tier1 Min*
Equal to Tier1 Max
Smaller than Tier1 Max
Satisfy either one of following:Tier3 Max
Equal to Tier3 Min
Bigger than Tier3 Min
Satisfy either one of following:Tier3 Min*
Equal to Tier3 Max
Smaller than Tier3 Max
* The sum of Tier1 Min and Tier3 Min must be 100 (%) or less.
Changing relocation priority setting of a V-VOL
The Storage Administrator (System Resource Management) role is required to perform this task.
1. In the Storage Systems tree on the left pane of the top window, select Logical Devices.
The following is another way to select LDEVs.
1. In the Storage Systems tree on the left pane of the top window, select Pool.
The pool name appears below Pool.
2. Click the pool associated with the V-VOL that has the relocation priority you want to
change.
3. Click the Virtual Volumes tab on the right pane.
2. From the table, click the row that has the V-VOL with the relocation priority you want to change.
3. Click More Actions to select Edit LDEVs.
The Edit LDEVs window appears.
4. Select the Relocation Priority check box and click Default or Prioritize. If you choose Prioritize,
LDEV is relocated preferentially.
5. Click Finish.
The Confirm window appears.
6. In the Task Name text box, enter the task name.
You can enter up to 32 ASCII characters and symbols, with the exception of: \ / : , ; * ? "
< > |. The value "date-window name" is entered by default.
7. Click Apply.
If the Go to tasks window for status check box is selected, the Tasks window appears.
112 Configuring thin provisioning