HP XP7 Provisioning for Open Systems User Guide (H6F56-96009)

Display items: Capacity usage for each tier
RAID ManagerGUIOutput informationCategoryNo.
YYCapacity for each tier (Total)THP pool1
YYCapacity for each tier (Usage)2
YYCapacity for each tier (Usage)THP V-VOL3
Display items: Performance monitor statistics
RAID ManagerGUIOutput informationCategoryNo.
NY
1
Frequency distributionTHP pool1
Y
2
Y
1
Tier range2
YYPerformance utilization3
NYMonitoring Period starting time4
NYMonitoring Period ending time5
NYFrequency distributionTHP V-VOL6
NYTier range7
NYMonitoring Period starting time8
NYMonitoring Period ending time9
Notes:
1. You can select either each level of the tiering policy or the entire pool. If you set other than All(0), the tier range is
not displayed when you select the entire pool.
2. The tier range when the tiering policy All(0) is selected is displayed.
Display items: Operation status of performance monitor/relocation
RAID ManagerGUIOutput informationCategoryNo.
YYMonitor operation status: Stopped/OperatingTHP pool1
YYPerformance monitor information:
Valid/Invalid/Calculating
2
YYRelocation status: Relocating/Stopped3
YYRelocation progress: 0 to 100%4
Managing Smart Tiers
Changing pool for Thin Provisioning to pool for Smart Tiers
The Storage Administrator (Provisioning) role is required to perform this task.
To change a pool for Thin Provisioning to a pool for Smart Tiers:
1. In the Storage Systems tree on the left pane of the top window, select Pool.
2. From the Pools table on right, click the row of a pool you want to change to the Smart Tiers
setting.
3. Click More Actions and select Edit Pools.
The Edit Pools window appears.
4. Check Smart Pool.
Smart Tiers 117