HP XP7 Provisioning for Open Systems User Guide (H6F56-96009)

Types of reportsThresholds or ValuesEventSIM Code (XXX
= hexadecimal
pool number)
Information to the
operator
Completion
report to Remote
Web Console
Report to the
host
the highest pool
threshold. SOM 734
must be enabled.
NoYesYes1% to 100% (in 1%
increments).
Pool usage level
exceeded the
Depletion Threshold
626XXX
Default: 80%
YesNoYesNot applicablePool-VOL is blocked627XXX
YesNoYesNot applicableProtect attribute of
Data Retention is set
628000
Automatic completion of a SIM
Some SIMs are completed automatically when you resolve the problem that caused the SIM. SOM
734 must be enabled for automatic completion of a SIM. Automatic completion of a SIM removes
it from the system with no additional manual intervention. After the SIM is automatically completed,
the status of the SIM changes to completed.
The following SIMs occur when the usage level of the pool exceeds the threshold. They are
automatically completed when you resolve the problem causing the SIM.
• SIMs 620XXX, 625000, and 626XXX are automatically completed if you increase pool
capacity by adding pool-VOLs because the condition that caused the SIM removed.
• SIMs are automatically completed in the following cases:
SIM 620XXX
If the usage level of THP pool number XXX falls below the warning threshold, SIM is
automatically completed.
◦
◦ SIM 625000
If the usage level of each THP pool in all pools of the storage system falls below the
depletion threshold, SIM is automatically completed.
◦ SIM 626XXX
If the usage level of THP pool number XXX falls below the depletion threshold, SIM is
automatically completed.
Manually completing a SIM
The Storage Administrator (System Resource Management) role is required to perform this task.
Some SIMs must be manually completed to clear them from the system.
After the trouble that caused the SIM is solved, you can manually complete the SIM. After manually
completing a SIM, the status of the SIM changes to completed. If you complete the SIM before the
underlying cause is solved, the SIM may reoccur.
1. Change the status of the pool whose usage level exceeds the threshold to normal. For
information about the solutions when the pool usage level exceeds the threshold, see
“Troubleshooting Thin Provisioning” (page 202).
2. In the Remote Web Console main window, in the Storage Systems tree, select Pool.
The pool name appears below Pool.
142 Configuring thin provisioning