Manualshelf

HP XP7 Provisioning for Open Systems User Guide (H6F56-96009)

ManualsBrandsHP ManualsComputer AccessoriesHP XP P9500 Storage DKC Module-1 Controller Upgrade Base Rack
31323334353637383940
ConditionOperation name
Suspend pairs
Resynchronize pairs
Release pairs
Continuous Access Synchronous
The following table provides information about specific Continuous Access Synchronous conditions
that must be observed when using Resource Partition.
ConditionOperation name
Specified ports must be assigned to the user.Edit Ports
Specified initiator ports must be assigned to the user.Add Remote Connection
Operation can be performed with no conditions.Edit Remote Connection Options
Primary volumes must be assigned to the user.Create Pairs
Initiator ports of remote paths that are connected with the primary volume in the
remote storage must be assigned to the user.
Specified primary volumes or secondary volumes must be assigned to the user.Split Pairs
Primary volumes must be assigned to the user.Resync Pairs
Specified volumes must be assigned to the user.Delete Pairs
If primary volumes are specified, the initiator ports of remote paths that are
connected with the primary volume in the remote storage must be assigned to the
user.
Primary volumes must be assigned to the user.Edit Pair Options
Specified initiator ports must be assigned to the user.Add Remote Paths
Specified initiator ports must be assigned to the user.Remove Remote Paths
Initiator ports of remote paths that are connected to a specified remote storage
must be assigned to the user.
Edit Remote Connection Options
Initiator ports of remote paths that are connected to a specified remote storage
must be assigned to the user.
Remove Remote Connections
Specified primary volumes or secondary volumes must be assigned to the user.Force Delete Pairs
Continuous Access Journal
The following table provides information about specific Continuous Access Journal conditions that
must be observed when using Resource Partition.
ConditionOperation name
Specified ports must be assigned to the user.Edit Ports
Specified initiator ports must be assigned to the user.Add Remote Connection
Specified initiator ports must be assigned to the user.Add Remote Paths
All LDEVs that are specified when creating a journal must belong to the same
resource group. Volumes to be assigned to a journal must be assigned to the user.
Create Journals
Volumes to be assigned to a journal must be assigned to the user. All volumes to
be assigned to a journal must belong to a same resource group to which the existing
journal volumes belong.
Assign Journal Volumes
38 Configuring resource groups