HP XP7 Provisioning for Open Systems User Guide (H6F56-96009)

DescriptionItem
LUN security setting (Enabled or Disabled) on the port.Security
Attribute of the port indicating I/O flow.Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
• Target: Receives I/O commands from a host.
• RCU Target: Receives I/O commands from an initiator when I/O is executed
between storage systems with Continuous Access Synchronous, and so on.
• External: Issues I/O commands to a target port of an external storage system
with External Storage.
Address of the selected port.Address (Loop ID)
Indicates whether a fabric switch is used.Fabric
Topology of the selected port.Connection Type
Total number of logical units set to the relevant port, and the maximum number
of logical units that can be registered to the port. When an initiator port or
external port is selected, a hyphen (-) appears.
Number of LUNs
Total number of hosts set to the relevant port, and the maximum number of hosts
that can be registered to the port. When an initiator port or external port is
selected, a hyphen (-) appears.
Number of Hosts
Total number of host groups set to the relevant port, and the maximum number
of host groups that can be registered to the port. When an initiator port or
external port is selected, the maximum number is not available.
Number of Host Groups
Host Groups tab
This tab provides information about the host groups assigned to the logged-on user.
CAUTION: For the initiator port, only host group 0(zero) is displayed to enable you to set a host
mode option. For details about host mode options, see “Host mode options” (page 171).
DescriptionItem
Identifier of the port.Port ID
Icons and names of host groups.Host Group Name
Clicking a host group name opens Port/Host Groups: Hosts, LUNs, and Host
Mode Options tabs.
Host group IDHost Group ID
1
Host mode of the host group.Host Mode
LUN security setting (Enabled or Disabled) on the port.Port Security
Number of hosts in the host group.Number of Hosts
Number of logical units in the host group.Number of LUNs
Resource group name and ID of the host group. If the port is the initiator port,
a hyphen (-) is displayed.
Resource Group Name (ID)
Model name and serial number of the virtual storage machine that has the port.Virtual Storage Machine
1
Opens the Create Host Groups window.Create Host Groups
Opens the Add LUN Paths window.Add LUN Paths
Opens the Add Hosts window.Add Hosts
396 LUN Manager GUI reference