HP XP7 Provisioning for Open Systems User Guide (H6F56-96009)

DescriptionItem
Opens the Add Hosts window.Add Hosts
Opens a window where you can export configuration information listed in the
table to a file that can be used for multiple purposes, such as backup or reporting.
Export*
* Available by clicking More Actions.
LUNs tab
This tab provides information about the LU paths that correspond to the LDEV assigned to the
logged-in user.
DescriptionItem
Identifier of the port.Port ID
Icons and identifiers of the logical unit. Clicking a LUN ID opens the LUN
Properties window.
LUN ID
LDEV identifier, which is the combination of LDKC, CU, and LDEV.LDEV ID
Clicking an LDEV ID takes you to the LDEV Properties window.
Name of each LDEV.LDEV Name
Displays the pool name and pool ID. If the logical volume is not the volume other
than V-VOL, a hyphen (-) is displayed.
Pool Name (ID)
Emulation types for each logical volume (or logical device).Emulation Type
Displays the logical volume capacity.Capacity - Total
Displays the V-VOL used capacity.Capacity - Used
The Total value displayed might be larger than the Used value due to following
reasons:
• Used displays the used capacity of the V-VOL that is rounded up on each
page.
• If the emulation type is 3390-A, the used capacity of V-VOL includes the
capacity of the control cylinders (7 Cyl is required per 1,113 Cyl).
If the logical volume is not the volume other than V-VOL, a hyphen (-) is displayed.
Displays the V-VOL usage level. If the logical volume is not the volume other than
V-VOL, a hyphen (-) is displayed.
Capacity - Used(%)
Displays the used capacity of tier 1. If the logical volume is not the volume other
than V-VOL, a hyphen (-) is displayed.
Capacity - Tier1
Displays the used capacity of tier 2. If the logical volume is not the volume other
than V-VOL, or if tier 2 does not exist, a hyphen (-) is displayed.
Capacity - Tier2
Displays the used capacity of tier 3. If the logical volume is not the volume other
than V-VOL, or if tier 3 does not exist, a hyphen (-) is displayed.
Capacity - Tier3
Displays the type for each logical volume.Provisioning Type
• Basic: Internal volume.
• External: External volume.
• THP: V-VOL of Thin Provisioning.
• Snapshot: Fast Snap volume.
Cache logical partition number, displayed as ID:CLPR.CLPR
Displays the tiering policy name and ID.Tiering Policy
All(0): Policy specified when all tiers in the pool are used.
Port/Hosts Groups: Hosts, LUNs, and Host Mode Options tabs 399