HP XP P9000 External Storage Access Manager User Guide (AV400-96607, January 2014)

Comparison of the RAID Manager commands and Remote Web Console
You can perform many ESAM pair tasks using the RAID Manager. The following list compares
RAID Manager commands and RWC functionality for operations that can be performed on ESAM
pairs:
• Though the host recognizes the ESAM volumes as a single volume, RAID Manager views the
P-VOL and S-VOL as separate volumes.
• RAID Manager shows the ESAM pair, the Continuous Access Synchronous pair, and the UR
pair, according to the following table.
Display of JIDDisplay of CTGDisplay of FencePair Type
Quorum Disk IDNEVERESAM pair
The CTG IDDATAContinuous Access
Synchronous pair
The CTG IDSTATUS
The CTG IDNEVER
The journal IDThe CTG IDASYNCContinuous Access
Journal pair
• When running RAID Manager commands on the S-VOL, make sure that you specify S-VOL
information in the scripts.
The following table shows the supported RAID Manager commands and corresponding RWC tasks.
RWC window or dialog boxRAID Manager commandTaskType of task
Add Quorum Disk ID dialog boxN/AAdd the quorum disk ID.Configuration
Paircreate dialog boxpaircreate -jp <quorum
disk ID> -f never
Create a pair.Pair operations
paircreate -jq <quorum
disk ID> -f never
Pairsplit-r dialog boxpairsplit -rSplit a pair.
Pairresync dialog boxpairresyncResynchronize a pair.
N/Apairresync -swapsResynchronize a pair (reverse
direction).
pairresync -swapp
N/Apairsplit -RSSwap & suspend a pair.
N/Apairsplit-RBForcibly change the S-VOL status
from SSWS to PSUS (rollback).
N/AhorctakeoverSwapping, suspending, and
resynchronizing a pair (reverse
direction).
Pairresync dialog boxN/AChange a Continuous Access
Synchronous pair to an ESAM
pair.
Pair Operation window orpairdisplayView pair status.Maintenance
Detailed Information dialog box
Pairsplit-S dialog boxpairsplit-SRelease pair.
Comparison of the RAID Manager commands and Remote Web Console 41