HP XP7 SNMP Agent User Guide (H6F56-96013)

Table 14 SNMP failure trap reference codes (continued)
Alert levelSectionDescriptionTrap reference code
SIM13SIM23SIM22
MODERATESVP failureSVP receiving voltage error (CL2)09E4BF
MODERATEProcessorSAS CTL blockingxx10CF
SERVICEProcessorA SAS PORT, one of 2WL, is partial blockedxx11CF
MODERATEProcessorSAS PORT blockedxx12CF
MODERATEProcessorLogical DMA blockingxx6xCF
SERVICEProcessorDRR TEMPORARY ERRORxx80CF
SERVICEProcessorDMA temporary errorxx81CF
MODERATEProcessorDRR BLOCKINGxx82CF
MODERATEProcessorDMA blockingxx83CF
MODERATEProcessorLR blockingxx88CF
MODERATEProcessorAll DMA blockingxx89CF
MODERATEProcessorMFDMA blockingxxBxCF
MODERATEProcessorLogical DRR blockingxxDxCF
SERVICEFailure with paired
volumes
TC-MF/TC started the initial copy or out of sync for this
volum
xx0xD0
SERVICEFailure with paired
volumes
TC-MF/TC completed the initial copy for this volumexx1xD0
SERVICEFailure with paired
volumes
TC-MF/TC for this volume was deleted(Operation from
an SVP/Web Console or a host processor)
xx2xD0
SERVICEFailure with paired
volumes
TC-MF completed the Create pair(No copy suspend)xx6xD0
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Simplex to Duplex Pending)
xx0xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Simplex to Duplex)
xx1xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Duplex Pending to Duplex)
xx2xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Duplex Pending to Suspend)
xx3xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Duplex to Suspend)
xx4xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Duplex to Simplex)
xx5xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Duplex Pending to Simplex)
xx6xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Suspend to Simplex)
xx7xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Suspend to Duplex Pending)
xx8xD1
SERVICEFailure with paired
volumes
Remote Copy pair status change (MCU Command) (From
Duplex Pending to Suspend(continue))
xx9xD1
28 SNMP failure trap reference