HP XP P9000 Replication Manager Software 7.6.1-00 Configuration Guide

Procedure on the executing node
1. On the executing node, make sure that the HP StorageWorks P9000 Command View AE Common
Component service is online, and that the executing node currently owns the service and shared
disk.
2. From the Start menu, choose Settings, Control Panel, Administrative Tools, and then Cluster
Administrator. In the Cluster Administrator window that opens, place the following services offline:
• DeviceManagerServer
• Tiered Storage Manager
• P9000 Command View AE Device Manager Web Service
• HBase Storage Mgmt Web Service
• HBase Storage Mgmt Common Service
• Any additional P9000 Command View AE suite resources not listed here
NOTE:
Do not place the shared resource offline, or migration of the database will fail.
3. Execute the following command to stop the HP StorageWorks P9000 Command View AE Common
Component service:
Common-Component-installation-folder\bin\hcmdssrv /stop
4. In the Cluster Administrator window, place the following service offline:
HiRDB/ClusterService _HD0
5. In the Cluster Administrator window, right-click the service, and choose Properties. In the window
that opens, choose the Advanced tab, select Do not restart, and click OK. (Perform this step for
each service in steps 2 and 4.)
6. Move the database onto the shared disk and follow all procedure as described in “Using the
hcmdsdbclustersetup command” on page 134.
NOTE:
This step is unnecessary if other P9000 Command View AE suite products have been set
up in a cluster configuration.
The folder specified for
installation-folder-for-P9000-Command-View-AE-Common-Component in the
above command must be the same folder as that specified in the migration of the active node's
database onto the shared disk.
7. In the Cluster Administrator window, right-click the group in which the HDvM service
(DeviceManagerServer) is registered, and choose Move Group to switch the node to the standby
node.
Procedure on the standby node
1. On the standby node, make sure that the standby node currently owns the HP StorageWorks
P9000 Command View AE Common Component service and the shared disk.
Configuration Guide 131