HP XP P9000 Replication Manager Software 7.6.1-00 Configuration Guide

NOTE:
When using Device Manager Agent on VMware 4.x, it is necessary to confirm the prerequisite
combination of Device manager server and Device Manager Agent. Even if you use Device Manager
and the Device Manager Agent for which the prior prerequisite combination has been confirmed,
the following precaution must be noted:
• If the target volume is set as a command device on the virtual machine, by using Add CMD
Devices, the virtualization server needs to be restarted in order to recognize the set command
device.
Installation of Device Manager Agent
Make sure Device Manager Agent is installed on both pair management servers that manage a
primary and secondary volume.
Link between Device Manager server and Device Manager Agent
Make sure Device Manager Agent links correctly with Device Manager server using the
hdvmagt_account command. If the link is incorrect, execute this command on the pair management
server to change the settings.
1. Log in to the pair management server as a user with Administrator or super user permissions. If
the OS you are using is Windows Server 2008 x86, Windows Server 2008 x64, Windows
Server 2008 R2, or Windows Server 2012, start the command prompt as Administrator.
2. Execute the hdvmagt_account command and make sure the Device Manager agent is correctly
linked to the Device Manager server.
For Windows:
<Device-Manager-agent-installation-folder>¥bin¥hdvmagt_account.bat
For Linux or HP-UX:
/opt/HDVM/HBaseAgent/bin/hdvmagt_account
Troubleshooting136