HP XP P9000 Replication Manager Software 7.6.1-00 Configuration Guide

3. If the agent is not correctly linked to the server, enter the following information in response to the
command request:
IP address or host name
Specify the IP address or host name of the Device Manager server.
• Specifying an IP address:
In IPv4, specify the address in dotted-quad form.
In IPv6, specify the address by using hexadecimal numbers delimited by colons. Abbreviated
forms can also be used.
• Specifying a host name: Specify the host name by using a string of up to 50 bytes. The fol-
lowing characters can be used: a-z A-Z 0-9 - . @ _
Port number
Specify the port number of the Device Manager server to which the Device Manager agent is
connected. A number from 0 to 65535 can be specified as the port number.
User ID and password
Specify the user ID and password for the Device Manager agent that is registered on the Device
Manager server. The user ID of the built-in account for the Device Manager agent is HaUser,
and the default password is haset. If you want to change the account used for the Device
Manager agent, you must first register the new user ID in the PeerGroup. For details about how
to configure a user group, see the HP P9000 Command View Advanced Edition Suite Software
Administrator Guide.
4. If the OS you are using is windows-based, restart the Device Manager Agent.
Properties of Device Manager Agent
Make sure Device Manager Agent properties (stored in the pair management server) are correct. For
details about the properties to be specified, see “Setting up the prerequisite environment” on page 53.
If you change the properties, restart Device Manager Agent.
Settings in the P9000 RAID Manager configuration definition file
Make sure that the specified settings in the P9000 RAID Manager configuration definition files are
correct, and the HORCM instances that correspond to these files can start without any problems. Also,
make sure that parameter formats and specified settings in the configuration definition files are
supported by Device Manager.
Items to be checked from Device Manager GUI
This section describes how to check information about hosts (pair management servers) that are
managed by Device Manager using the Device Manager GUI:
1. Recognition of Device Manager Agent, page 138
2. Recognition of the command device, page 138
3. Recognition of the replication configuration, page 138
4. Recognition of storage systems, page 138
For details about Device Manager GUI, see the HP P9000 Command View Advanced Edition Suite
Software Online Help.
Configuration Guide 137