HP XP P9000 Replication Manager Software 7.6.1-00 Configuration Guide

In either of the above cases, Replication Manager cannot be used to edit the disk configuration
definition files that were created by HP StorageWorks P9000 for Business Continuity Manager 6.6.1.
Instead, you must use HP StorageWorks P9000 for Business Continuity Manager 6.7 or later to edit
the disk configuration definition files and then perform volume scan or distribution with Replication
Manager).
Supported storage systems
Replication Manager supports all storage systems supported by Device Manager server:
• XP512/XP48
• XP1024/XP128
• XP12000/XP10000/SVS200
• XP24000/XP20000
• P9500
For details, see the HP P9000 Command View Advanced Edition Suite Software Administrator Guide.
TIP:
For best results, ensure that you have the latest version of the storage system microcode as well as
the latest version of P9000 RAID Manager installed.
NOTE:
Before using copy groups defined in storage, ensure that the microcode version of the P9500 system
is 70-02-00-XX/XX or later.
Firewall exceptions
If a firewall is present, the port number for transmissions to and from Replication Manager must be
registered as an exception. The tables that follow describe the port numbers associated with each
type of configuration:
• Table 21
• Table 22
• Table 23
• Table 24
• Table 25
The number of each port can be changed. For details about how to change the port numbers, see
the following manuals:
• For port numbers used by Common Component, Device Manager server, and Device Manager
agent: HP P9000 Command View Advanced Edition Suite Software Administrator Guide
• For port numbers used by Business Continuity Manager: HP P9000 for Business Continuity Manager
Software Installation Guide
• For port numbers used by Mainframe Agent: HP P9000 Command View Advanced Edition Suite
Software Mainframe Agent Installation and Configuration Guide
Configuration Guide 47