HP xp8000 series digital projector - (English) Reference Guide
Reference Guide 23
Installation and Setup
Turning On and Off
This section provides the following instructions:
■ “To connect power” on page 23
■ “To turn the projector on” on page 24
■ “To turn the projector off” on page 25
■ “To operate the remote control” on page 25
■ “To reset the projector” on page 26
To connect power
1. Connect one end of the power cord to the back of the projector 1 and the other
end to an electrical outlet
2.
2. Turn on the main disconnect switch
3 on the back of the projector.
✎
To maintain network connectivity, the main disconnect switch must remain in the on
position.