HP xp8000 series digital projector - (English) Reference Guide

Reference Guide 51

Presentations

Disconnecting

CAUTION: Do not disconnect power or turn off the projector until the projector has cooled

down (the fan stops) and the power button light stops blinking. Otherwise, you might shorten

the life of the lamp.

1. Press the power button on the projector or remote control to turn off the projector.

The power button blinks during the two-minute cool-down period. Then, the

projector enters Standby mode, which retains network connectivity.

2. You can disconnect video and audio equipment from the projector during the

cool-down period but not the power cord.

✎

If the projector is connected to a network, do not turn off the main disconnect switch

or unplug power. Disconnecting the power breaks the network connection.

3. If you must unplug or remove the projector, wait until the power button light stops

blinking. Then turn off the main disconnect switch on the back of the projector

and unplug the power cord.

If you try to turn on the projector again during the cool-down period, it does not turn

on. Wait until the cool-down period ends and the power button stops blinking.