HP xp8000 series digital projector - (English) Reference Guide

Reference Guide 53

System Management

This chapter explains how you can manage one or more projectors. If the projector

is connected to a network, you can work from a central location by accessing the

projector’s embedded web server, rather than being in the same room as the projector.

You can check the projector's current status, change its configuration, program

automatic shutdown times, and upgrade firmware—all from a remote location.

The web interface has been tested on Microsoft Windows 2000 and XP, Mac OS 9

and 10, Internet Explorer 5.5 and above, and Netscape Navigator 7.0 and above.

This chapter covers:

■ “Managing the Projector” on page 53.

■ “Upgrading the Projector” on page 56.

Managing the Projector

This section provides the following instructions:

■ “To find the IP address” on page 53

■ “To set basic projector properties” on page 54

■ “To set up email for notifications” on page 55

■ “To protect configuration changes” on page 55

To find the IP address

■ Press enter on the projector or remote control to open the on-screen menu. Record

the IP address, shown as a series of numbers on the bottom of the menu.

Press the back button to close the menu.