HP xp8000 series digital projector - (English) Reference Guide

54 Reference Guide
System Management
To set basic projector properties
1. On a networked computer, open an internet browser, enter the IP address of the
projector in the URL bar, and press Enter. See “To find the IP address” on
page 53 for more information.
2. Depending on the property you want to view or change, go to the location
indicated in the following table.
3. Make any necessary changes and click Apply.
Changing Projector Properties
Projector Property Location in Web Interface
Status Home > Device Info
Web interface language Home > Select Language
Picture and audio* Projector
Basic network configuration* Networking > TCP/IP (or Wired Settings
on certain models)
Advanced network configuration Networking
*These properties are also available in the on-screen menu.