HP xp8000 series digital projector - (English) Reference Guide

62 Reference Guide
Maintenance
Quick Choice menu
This menu provides quick access to commonly used functions from other menus. The
menu in your projector may differ from the menu shown below.
Input menu
This menu was named the Connect menu in earlier firmware versions. For a visual
aid, see “Back panel” on page 12.
quick choice
Brightness Brightens or darkens the image.
Contrast Sets the difference between light and dark areas.
Keystone correction Corrects the slanted edges of an image. This
function compensates for an off-center projector
location.
Reset keystone correction Resets the keystone correction to zero.
Hide Removes all images from the screen.
input
VGA #1 Shows the input to the VGA #1 port. The VGA #1
usually connects the projector to a computer. This
port usually connects to a computer. This input is
normally considered a graphics input.
VGA #2 Shows the input to the VGA #2 port. The VGA #2
usually connects the projector to a computer. This
port usually connects to a computer. This input is
normally considered a graphics input.
Composite video Shows the input to the yellow composite port (the
input to the left of the S-video port on the back
panel). The port usually connects to TV or VCR. This
input is normally considered a video input.