- Hewlett-Packard LaserJet Printer User's Guide

IU 675 / 0150 7 TowerFeed

for the HP LaserJet 9000

INSTALLATION

Removing the Trays Transportation Inserts

For shipping, the bottom plate of the TowerFeed

tray is secured with transportation inserts. These

have to be removed before loading the trays.

• Pull out, lift upwards and pull out the trays from

TowerFeed. Remove the transportation inserts

(Fig. 10). There are two at each side (please

keep the inserts for eventual later re-

shipment).

• Re-insert and close the trays.

Note:

In the right side plate of the tray you will find

white coding pins for the respective paper

size. These are set by the factory and must

not be changed.

Installing the PPCA in the Printer

The PPCA (Paper Path Connection Assembly, Fig.

11) from the accessories box has to be installed in

the printer to guide and transport the paper delivered

from TowerFeed inside the printer.

• Open the right side cover of the printer.

• Take the PPCA - with the black rollers towards

you and the gearing to the right - and retract the

gray sliders with the metal bolts.

• Slide the PPCA into the gap behind the right

side cover of the printer and release the sliders

to let the bolts snap into position (Fig. 12).

Fig. 10 TowerFeed tray with transportation inserts

Fig. 11 PPCA

Fig. 12 Installing the PPCA in the printer