HP Insight Control Server Deployment 7.
© Copyright 2003, 2012 Hewlett-Packard Development Company, L.P. Notices Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Contents 1 Overview..................................................................................................5 2 Getting started...........................................................................................7 Deployment Console basics.......................................................................................................7 Connecting server blades..........................................................................................................
Tables 1 2 3 4 5 6 7 8 9 Knowledge Base articles.....................................................................................................5 Typical Windows scripted install job layout..........................................................................12 Typical Windows file layout...............................................................................................12 Windows scripted install default settings..........................................................................
1 Overview HP Insight Control server deployment is a server deployment solution that provides: • Automated server hardware configuration and operating system deployment. • Consistent Windows, VMware, and Linux deployment on the latest HP servers. • Scalable deployment of ProLiant Blade Servers. This document describes the provided content and outlines how to get started. NOTE: This document does not cover how to use the Altiris Deployment Server.
2 Getting started To get started, double-click the Deployment Console icon on the desktop. The Deployment Console, from which you can manage computers and execute jobs, appears. Deployment Console basics • Computers pane This pane shows managed computers. The New Computers group shows computers that have connected to the Deployment Server for the first time. Click View→Show Physical Devices to show the Physical Devices group. • Jobs pane This pane shows the provided jobs.
Connecting server blades 1. 2. 3. 4. Connect the enclosure to the network that contains your Deployment Server, and power up the enclosure. Change the default rack and enclosure names. Insert the server blades into the enclosure and wait for the blades to power up. From the Computer pane, right-click on a server blade and select Power Control→iLO – Interface. The iLO homepage appears. Deploying the first server blade 1. In the Jobs pane, select a Windows scripted install job.
4. 5. 6. Click OK. Select Run this job immediately, and then click OK. If the Windows scripted install job is still running when the warning message appears, click OK.
3 Reference Design HP delivers content as "features," each of which is a self-contained set of files and jobs. Each feature is independent, and resides in its own folder with key files located in the root folder and other supporting files located in various subfolders. Because the features are independent, their jobs are also independent. That means there are no monolithic jobs that configure the system, configure the smart array, install an operating system and install a support pack.
• When executing a read job, the output file will be overwritten. • All input and output files are stored in the root of the feature. • The bin subfolder contains various scripts and utilities. • For firmware, the components subfolder contains the contents of the \compaq\swpackages directory from the Firmware CD. • For firmware, overwriting the components subfolder with a newer version of the Firmware CD is not supported.
Table 3 Typical Windows file layout (continued) File/Subfolder Description Captured Sysprep images images\ Post-deployment scripts for configuration and software installation oem\ Drivers required for deployment drivers\ A small set of smart components required to make the target manageable components\ Table 4 Windows scripted install default settings Component Default setting Administrator password The administrator password is password.
Table 6 Typical RHEL and SLES file layout File/Subfolder Description answer files Various support utilities bin\ Distribution files dist\ Post-deployment scripts for configuration and software installation; as needed, boot files for deployment oem\ As needed, drivers required for deployment drivers\ A small set of smart components required to make the target manageable components\ Contains operating system specific updates, installed after operating system installation.
Table 8 Hyper-V scripted install default settings Component Default setting Administrator password The administrator password is password. Drive configuration A single partition is created automatically that expands to the full drive size. Computer name The computer name uses the 15 right-most characters of the console display name. Firewall Firewall settings are disabled. Networking Added to workgroup "WORKGROUP". SNMP and WMI are enabled.
4 Changing deployment server/solution username or password (after initial installation) Prerequisites Before changing the password perform the following steps: 1. Verify that Insight Control server deployment has been installed and configured correctly with the local SQL server. 2. Verify that all Insight Control server deployment/Altiris servers are running successfully. Changing the password To change the password after Insight Control server deployment installation, perform the following steps: 1.
1. 2. 3. Click Start→Run. Type "services.msc" > change the logon password of the services mentioned below by Right-click on the service, click “Properties”, click the “Log On” tab, change the password and confirm password with the new username/password, click “OK” Type services.msc. Change the logon password of the following services.
1. 2. 3. Click Start+All Programs+Altiris+Deployment Solution+Configuration. A new window opens. Click the Option. Select Drive Mapping to change the credentials. Changing the database’s user password (example: SQL Server Express) To change the user password on the database, perform the following steps: 1. Click Start Menu+All Programs+Microsoft SQL Server 2005+SQL Server Management Studio Express. 2. Login with your username and password. 3. Click the Security folder and the Logins folder. 4.
5 HP support and contact information Online resources • For more information and to obtain the latest updates, see the Insight Control website at http:// www.hp.com/go/insightcontrol. • For more information about specific how-to procedures, troubleshooting information, and frequently asked questions, see the Knowledge Base at http://www.hp.com/go/insightdeploy/ kb.
There are two methods for registering: ◦ If you received a license entitlement certificate, automated registration for this service will take place upon online redemption of the license certificate/key. ◦ If the license information you received for your product instructs you to register for Software Technical Support and Update Service, follow the instructions so that you will be eligible for telephone support and product updates.
HP has a well defined process when a security defect is found that culminates with the publication of a security bulletin. The security bulletin provides you with a high level description of the problem and explains how to mitigate the security defect. Subscribing to HP security bulletins 1. 2. 3. 4. 5. Open a browser to the HP home page: http://www.hp.com. Click the Support & Drivers tab. Under Additional Resources in the right navigation pane, click Sign up: driver, support, & security alerts.
