Software for ProLiant

1. Download and install WAIK version 3.0 for Windows 7 from the Microsoft Download Center.
2. To make DISM tool available for the application server, perform one of the following:
• Update the hpmmsvc.conf file (<ICMigr Installation Path>\bin\windows\) to add
set.Path=<>;<WAIK Installation Path>\Tools\Servicing, and then restart
server migration services.
• Add the windows PATH environmental variable with the-<WAIK Installation
Path>\Tools\Servicing parameter.
3. Restart the server migration services.
4. To verify and view that DISM version 6.1 is installed, go to the Upload Drivers tab of the server
migration wizard.
NOTE: To migrate windows 2012 R2 from an application server, DISM 6.3 must be available.
To enable DISM 6.3:
1. Download and install Assessment and Deployment Kit (ADK) from the Microsoft Download
Center.
2. In the hpmmscv.conf file add a new entry under # Java Additional Parameter in the following
format:
wrapper.java.additional.6=-DdismDir="<Windows ADK installation
directory>.. /Assessment and Deployment Kit/Deployment
Tools/amd64/DISM
NOTE: Increment the additional integer parameter by 1 from the last available value. The
directory path must be in quotes, if there are spaces in the path.
3. Restart the server migration services.
4. To verify and view that DISM 6.3 is installed go to the Upload Drivers tab of the server migration
wizard.
Source preparation
Corrective action is required before this server can be migrated
The following message appears when an affected system is detected during the launch of the
source server agent:
ATTENTION:Corrective action is required before this server can be
migrated.
Cause
Some versions of Windows Server 2003 that are preinstalled by HP cannot be migrated successfully
unless you perform corrective action before attempting the migration. The server migration Source
Agent detects affected systems during initialization. If the system is affected, instructions for
performing the corrective action are provided. If you attempt the migration without first performing
the corrective action, your destination server becomes nonbootable.
NOTE: The server migration Source Agent will not detect whether the corrective action has already
been performed. Subsequent attempts to execute this agent will indicate that corrective action is
still required. However, the corrective action must be applied only once.
Suggested action
Perform the following:
Source preparation 51